454 short block or complete
01-08-2012 | 01:53 PM
#1
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
454 short block or complete
I have a 454 .060 4 inch stroke. Not sure on hours as it was bought as a take out. Turns over free and oiled for storage.
Short block 1000
Specs:
GM 4 bolt main gen IV
Heli'd head bolt threads
Forged steel crank
Rotating assbly balanced
Rods are 7/16 cap hardware
Pistons SRP 9/1 .060
Crane cam 10313 94-304
Double roller chain
Gil 10 qts pan, was repaired doesn't leak no pick up
Factory base also with pump and pick up
Aluminum air gap style intake
Edlebrock fuel pump block mounted
Available:
990 heads 300
Peanut port 100
Roller rockers and 1 piece hd push rods 125
Merc blue valve cover 100
Black aluminum valve cover 50
Hp 500 flame arrestor 120
Engine needs a refresh as do the heads but was all running when removed.
Thanks
Mike
Short block 1000
Specs:
GM 4 bolt main gen IV
Heli'd head bolt threads
Forged steel crank
Rotating assbly balanced
Rods are 7/16 cap hardware
Pistons SRP 9/1 .060
Crane cam 10313 94-304
Double roller chain
Gil 10 qts pan, was repaired doesn't leak no pick up
Factory base also with pump and pick up
Aluminum air gap style intake
Edlebrock fuel pump block mounted
Available:
990 heads 300
Peanut port 100
Roller rockers and 1 piece hd push rods 125
Merc blue valve cover 100
Black aluminum valve cover 50
Hp 500 flame arrestor 120
Engine needs a refresh as do the heads but was all running when removed.
Thanks
Mike
