mustangmark

1.) B&M 250 blower crank pulley (16rib) $125.00 obo + shipping
2.) B&M 250 blower crank pulley (3-row/v-groove) $75.00 obo + shipping

http://i986.photobucket.com/albums/a...6/osoparts.jpg

3.) Holley 830 tweaked by c&j engineering (google them, they have a good Rep). $350.00 obo + ride

(price is slightly negotiable on the carb but don't insult me with an absurd offer)

Progressive linkage
Milled choke horn
annular boosters changed to down leg
thinned throttle plates
fuel curve set up by C&J
30cc acc. Pump (primary) / 50cc acc. pump (secondary)
Flows 1000cfm

http://i986.photobucket.com/albums/a.../osoparts1.jpg

http://i986.photobucket.com/albums/a.../osoparts2.jpg

http://i986.photobucket.com/albums/a.../osoparts3.jpg

http://i986.photobucket.com/albums/a.../osoparts4.jpg

4.) BBC dart intake / oval port (single plane / 9.8 deck height / 4150 top / oval port / water jactets are not corroded at all!) INTAKE ONLY!!! no carb, no water neck, no intake bolts, no regulator, no sensors, etc... JUST THE INTAKE(this pic was taken right after I put it on this summer so it could use a bath from the moisture and corrosion that's on it now but it's not bad and functions perfectly! $225.00 obo + shipping

http://i986.photobucket.com/albums/a...rk66/dart1.jpg

http://i986.photobucket.com/albums/a...ark66/dart.jpg

NOTE: I'm looking for the 4 spacers that the tensioner/idler bracket for a B&M 250 blower mount to (the spacers sit between the tensioner bracket and intake manifold. **SPACERS MUST BE FROM SERPENTINE BELT SET UP**. Willing to pay w/ paypal, us postal money order or deduct $$$ from parts if you see something here you want).

Mark 925-250-9428

mustangmark

ttt

mustangmark

Ttt....carb is sold.