What is the difference between a 1071 and a 1471 blower? I have a supposed 1471 littlefield setup for alcohol & set on a sbc manifold, their are no #s on the blower but it is longer than the manifold. Randy

what is the length of the case you have, measured from inner side of front and rear bearing plates

I will have to measure it next time I visit my storage barn, its the actual case length not the case & end plates? thanks, Randy

Ok Alan, I should be in around 7 or so.

ok boys!! enough with the BS... bring me a decent offer for these pristine units, no disappointments with these!!

Is the intake for a tall deck or short deck block?

if you don't have anything intelligent to say PHUK OFF!!
have you not heard of spacers? std deck manifolds, with spacers make for tall deck application!!!

That a boy! run off those potential buyers.... now the rest of these guys can see your true colors that I spoke of earlier. It appears you may have a pair of 10-71's forever due to your attitude.

that was not a potential buyer, just someone with too much time on his hands wanting to be funny... I surely don't have a bad attitude for those who are serious and really need my assistance, my skin is a tad thin after months of having my valuable time wasted... sorry that I appear abrupt, but I just have way too much work and not enough time for games...
xtreme 1, as I stated before, I'm happy you got what you're looking for, and I don't harbor any Ill will towards you, and for the record, once yet again, if they don't sell not worried, they will go right back on the engines... 935hp x 2 will rock my boat just fine!!!

Al if u just spent more workin & not always lookin on OSO at ur blower ad u might make more of this $$$$$$$$$$$ & then u wouldn't have to sell them u could just buy some 8L whipple's with efi