!! Gil manifolds and tails !!
#1
Registered
Thread Starter
Join Date: Oct 2007
Location: marbury, md
Posts: 1,224
Likes: 0
Received 0 Likes
on
0 Posts
!! Gil manifolds and tails !!
I have a set of gil manifolds and tails for sale. They are several seasons old and where used on a 500 Bulldog. They are for a bravo setup. They were also hooked up to Capt. Choice, which is also available.
$1000 for the manifolds and tails
I also have an extra set of tails for $300
$1000 for the manifolds and tails
I also have an extra set of tails for $300
Last edited by My Addiction; 04-25-2012 at 03:35 PM.
#6
Registered
Can you email me some better pics, mainly of the exhaust flanges and the tailpipe condition..
Salt??
[email protected]
Thanks,
Derek
Salt??
[email protected]
Thanks,
Derek
#7
Registered
Thread Starter
Join Date: Oct 2007
Location: marbury, md
Posts: 1,224
Likes: 0
Received 0 Likes
on
0 Posts
These are are at my Dad's. That is gasket material on the flange, that he did not clean off. He will send me a new pic after he gets all the material off. These where used in fresh water and the brackish Potomac River.
#10
Registered
Thread Starter
Join Date: Oct 2007
Location: marbury, md
Posts: 1,224
Likes: 0
Received 0 Likes
on
0 Posts
More pics as requested. Some of the coating came off at the gasket area so they have been painted. With the proper gasket these will not leak! These are the smooth type manni without the plugs. The two scratch marks above the flanges are from valve cover removal, and one is scratched on the out side from the engine hatch actuator arm. Those marks are not plugs or welds.
this is everything
this is everything
Last edited by My Addiction; 04-29-2012 at 08:55 PM.