Fresh 509's 600hp ready to go!
 

I have a pair of fresh low hour 509 motors. These started life as carb hp500 motors. One of the motors was completely rebuilt with eagle crank, eagle rods, srp pistons, comp roller lifters, comp roller cam, new push rods, new valve springs, port matched intake, carb spacer, and port work done on the heads by Jim V. Second motor has stock crank, and rods, but everything else matches the 1st motor. These motors run excellent, and require premium fuel as they are 9.5 comp ratio. Engine's also come with stainless marine manifolds and dry stainless tails. Engine's also come with dual cooler bellhousing's. Engine's are fully dressed, and ready to drop in. All work was done 50 hours ago, and they run excellent! Asking $ 18,000.00 shoot me a pm, thanks Rob.

Send me your contact info, I live in Rockford and am looking for two engines

PM sent

i just want the flame arrestor.lol it matches my boat

They are perttttttttty:)

Ttt

ttt

I would be willing to sell these separate as well......

Ttt

how much if decent ill take them

Will let them go for $17k as a pair complete plug and play, or will split up for $8500.00 each. I can arrange freight shipping through my work and can handle all palletizing banding and shrink wraping as well. Will pass my cost savings through the business on to you as well. Or feel free to come pick them up in person.

Ttt

Not interested in buying then but what have you got in mind to replace them?

plug and play for 17 k is a very good deal

Just parting out my formula. It's worth more in pieces than it is complete. Looking to get into a different boat.

Whats wrong with the hull/boat???

Nothing I just want 100mph, and its going to be to costly to do it in this package. Will take 33 Daytona in on trade:)

still got them flame aressters , sent you a reply but no answer back . let me know

What do you want for the boat with the engines?

Sorry! never saw a request come through..... I want to keep them with the motor's. Thanks Rob

So complete boat minus everything from the boxes back? $27000.00 without the huber's. $31000.00 with transmission's

https://www.dropbox.com/sh/1apsjpnpg8pxrum/2VyqieoHm8 here is a link to some pics

ttt

Still have these, price is not firm. Willing to deal.

509
 

What kind of transmissions and would you be willing to sell

make an offer!!!

Sold the drives and transmissions, engine's will be on a pallets ready to ship in a week or two. This a great deal guys!!!!

PM sent

And returned to you as well.

These are now out of the boat and ready to go!!! They have been winterized and fogged, and are ready to ship. Just need some $ and a shipping address :)

Also have a set of shorter stainless marine tails, that would probably work for a bravo setup. On skids ready to go!!!

what kind of formula did they come out of and how fast was top end i may be interested i have 272 stock 500hp

These were in a 86 formula 357, pushed that to 73 gps.

509 motors
 

what size are carbs, 600 hp???? will u take 15,000 cash -carry

509 motors
 

what make is exhaust????

Exhaust is stainless marine, carbs are the Holley 850's with super sucker carb spacers port matched to the intakes's. I am willing to deal if you are serious!

where are thease motors located exactly

Cedar Springs MI 49319

Can u give me phone# i have a couple quetion on the engines
thanks mike

616-293-5999 thanks Rob.