2 bravo 1 drives, transom plates, Steering, Showers, Props - Cheap
08-28-2012, 01:57 PM
#1
Registered
Thread Starter
Join Date: Oct 2009
Location: Splendora, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
2 bravo 1 drives, transom plates, Steering, Showers, Props - Cheap
If interested, please email me at [email protected] or call me at 281-743-5390. I can't keep track of the PMs. If you want pictures, email me.
Drives came off my 1994 Freshwater Cigarette Top Gun.
The entire boat hours are between 250-300 hours.
Never had any problems with the drives.
Oil changed out every 10 hours and were babied.
I am getting Arneson ASD7M Surface Drives put on and everything is sitting on 2 crates at Gulf Coast Composite in Kemah, TX.
$5000+shipping Takes ALL.
$4500+shipping without PROPS
Two Complete Bravo 1 drives with 1 Inch Prop Shaft.
Two Complete Transom Assemblies with Bell housing and Engine Starters
Two Halo MAX Drive Showers
Lantham Sterring with Tie Bar and Trim and Steering Cylinders
Two 26 Pitch Cleaver Style 4 Blade Hydromotive Props (1 inch prop shaft, not adjustable) $500 for Pair + Shipping
Two 25 Pitch Labbed 5 Blade Maximus Props (currently have the 1" insert to fit a 1" shaft) $500 for Pair + Shipping
Regards,
David
Drives came off my 1994 Freshwater Cigarette Top Gun.
The entire boat hours are between 250-300 hours.
Never had any problems with the drives.
Oil changed out every 10 hours and were babied.
I am getting Arneson ASD7M Surface Drives put on and everything is sitting on 2 crates at Gulf Coast Composite in Kemah, TX.
$5000+shipping Takes ALL.
$4500+shipping without PROPS
Two Complete Bravo 1 drives with 1 Inch Prop Shaft.
Two Complete Transom Assemblies with Bell housing and Engine Starters
Two Halo MAX Drive Showers
Lantham Sterring with Tie Bar and Trim and Steering Cylinders
Two 26 Pitch Cleaver Style 4 Blade Hydromotive Props (1 inch prop shaft, not adjustable) $500 for Pair + Shipping
Two 25 Pitch Labbed 5 Blade Maximus Props (currently have the 1" insert to fit a 1" shaft) $500 for Pair + Shipping
Regards,
David
Last edited by UrbanDisturbance; 08-30-2012 at 07:20 AM.
08-28-2012, 03:13 PM
#4
Pirate of the Chesapeake
Gold Member
iTrader: (2)
Join Date: Aug 2006
Location: North Point Creek, Md.
Posts: 4,330
Likes: 0
Received 0 Likes
on
0 Posts
Your box is full How much for the drives. How much for the26" props are they 3 or 4 blade,and last how much for the transom assy. JOHN SR
08-28-2012, 03:36 PM
#6
Registered
Thread Starter
Join Date: Oct 2009
Location: Splendora, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
The 26 Pitch hydromotive props are the 4 blade clevers. They have welded insert for a 1 inch prop shaft, so you can't change it. The Maximus 5 blades are not that way. I do not want to sale my trasom assembly without the entire drive and cylinders. I'll check offshoreonly tomorrow.
08-29-2012, 04:12 AM
#10
