3 sets of isky 9905 valve springs
#1
Registered
Thread Starter
Join Date: Jun 2010
Location: New Jersey
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
3 sets of isky 9905 valve springs
I have 3 sets of isky valve springs model # 9905 out of my uncles nor-tech 1000hp motors. Used but not sure how long. They were good when removed.
Also have 1 set of matching retainers and 2 sets of keepers.
Send email for pictures. These springs are the double spring set.
Valve Springs, Dual, 1.534 in. Outside Diameter, 500 lbs./in. Rate, 1.160 in. Coil Bind Height.
1 set has 15 springs because he had one break.
[img]http://i497.photobucket.com/album[img]
Make offer new they go for $460.00/ set, will separate into sets only. Thanks
Also have 1 set of matching retainers and 2 sets of keepers.
Send email for pictures. These springs are the double spring set.
Valve Springs, Dual, 1.534 in. Outside Diameter, 500 lbs./in. Rate, 1.160 in. Coil Bind Height.
1 set has 15 springs because he had one break.
[img]http://i497.photobucket.com/album[img]
Make offer new they go for $460.00/ set, will separate into sets only. Thanks
Last edited by Tommybaja; 09-16-2012 at 12:02 PM.
#4
Registered
Thread Starter
Join Date: Jun 2010
Location: New Jersey
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
The motors received freshening up after every season. He has a house in nj and fl so when he left nj for the winter is when he had them all taken apart and they found 1 broken spring which is why there are 15 in one set. So he decided to have them all changed.