Gen 6, HP500 Heads
#11
VIP Member
VIP Member
Thread Starter
I have a dual plane alum GM intake with the brass thermo water passage and 1" spacer that was used on Merc 454 and 502 mags. It was not used on the HP500 but I know of many that have used this intake on 500+HP builds. It will mate with these heads and that is my plan if I ever need to use these parts. The intake was used 2 season in fresh water and is perfect. I also have the 750 Webber Carb used on 454 and 502 mags, it cam with the intake and is good for about 450HP. I'll sell the intake and carb for an extra $150 to someone that buys the heads...
__________________
Patrick
Patrick
Last edited by Pat McPherson; 09-14-2013 at 07:08 AM.
#12
VIP Member
VIP Member
Thread Starter
14097088 head castings, 6269318/51F28P5 intake
Pics as requested...[ATTACH=CONFIG]508176[/ATTACH][ATTACH=CONFIG]508177[/ATTACH][ATTACH=CONFIG]508178[/ATTACH][ATTACH=CONFIG]508179[/ATTACH][ATTACH=CONFIG]508180[/ATTACH]
__________________
Patrick
Patrick