![]() |
pair of bbc motors
3 Attachment(s)
2 used big block chevy 454 motors, gen 4 bowtie blocks,merlin heads,crane roller rockers,10 qt canton pans, gm forged cranks , dimple rods , wiend intakes , 850 holleys. hyd. flat tappet cams. motors came out of a local boat that I purchased from the marina that was sitting for a few years. These motors had some exterior scaling which I cleaned of and painted. I put new water pump housings and impellers in bolted on a set of test headers and ran them on the hose. Both motors tested good with compression check . I did know the previous owner and the boat was barely used and was kept on a hoist and always flushed. These are complete less exhaust. $3800 each or $7400 for the pair
Tom 516-609-0499 |
as per the pm questions . The old owner claimed they were approx. 500hp.
|
1 Attachment(s)
casting number 10051107
|
motors
7,000 for motors pick up this weekend
|
Originally Posted by corvettez06
(Post 3853595)
7,000 for motors pick up this weekend
|
Originally Posted by TomFTM
(Post 3853201)
casting number 10051107
Nice blocks. To bad you weren't just selling the blocks. Those could make some nice 540's+. http://www.s-series.org/htm/tech/GMP...ts/099-104.pdf |
Do you know what heads are on it?
Thanks |
did these sell
|
Deal pending.
|
| All times are GMT -5. The time now is 12:26 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.