Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
Gill Magnum manifolds and long risers for bravo. >

Gill Magnum manifolds and long risers for bravo.

Notices

Gill Magnum manifolds and long risers for bravo.

Thread Tools
 
Old 03-09-2013 | 04:31 PM
  #1  
Thread Starter
Registered User
 
Joined: Dec 2012
Posts: 91
Likes: 0
From: Lake Havasu City AZ
Default Gill Magnum manifolds and long risers for bravo.

3 seasons old Magnums and long risers for stock bravo location. Pressure tested good have all the bolts needs new turbulators. Has some powder coat bubbles where the plug welds are. Rick from CP Performance states they are good for 10 years running in salt water and this boat had the salt away system on it and was used after each time the boat was run. 800.00 for the set plus the ride OBO!
Attached Thumbnails Gill Magnum manifolds and long risers for bravo.-dscf0896.jpg   Gill Magnum manifolds and long risers for bravo.-dscf0897.jpg   Gill Magnum manifolds and long risers for bravo.-dscf0898.jpg  

Gill Magnum manifolds and long risers for bravo.-dscf0899.jpg   Gill Magnum manifolds and long risers for bravo.-dscf0900.jpg   Gill Magnum manifolds and long risers for bravo.-dscf0901.jpg  

Gill Magnum manifolds and long risers for bravo.-dscf0902.jpg  
havasubrian is offline  
Reply
Old 03-10-2013 | 10:32 PM
  #2  
Thread Starter
Registered User
 
Joined: Dec 2012
Posts: 91
Likes: 0
From: Lake Havasu City AZ
Default

ttt
havasubrian is offline  
Reply
Old 03-10-2013 | 10:34 PM
  #3  
Registered
 
Joined: Jan 2008
Posts: 2,610
Likes: 1
Default

are they dry all the way back
kidapache is offline  
Reply
Old 03-10-2013 | 10:58 PM
  #4  
Thread Starter
Registered User
 
Joined: Dec 2012
Posts: 91
Likes: 0
From: Lake Havasu City AZ
Default

The one picture shows the exit holes for the water looking into the tailpipe it is about an inch or so in of the end. I can messure that in the morning and let you know, but they are not dry all the way back. You could plug weld the holes and weld dump bungs in the sides.
havasubrian is offline  
Reply
Old 03-10-2013 | 11:10 PM
  #5  
Registered
 
Joined: Jan 2008
Posts: 2,610
Likes: 1
Default

tell me how long the tails are from end too end
kidapache is offline  
Reply
Old 03-11-2013 | 09:19 AM
  #6  
Thread Starter
Registered User
 
Joined: Dec 2012
Posts: 91
Likes: 0
From: Lake Havasu City AZ
Default

From the front of the mounting flange to the tip is 21"
havasubrian is offline  
Reply
Old 04-05-2013 | 07:07 PM
  #7  
Registered
 
Joined: Feb 2011
Posts: 39
Likes: 0
From: Las Vegas,NV
Default

are these still available?
msjbtex is offline  
Reply
Old 04-05-2013 | 11:41 PM
  #8  
Thread Starter
Registered User
 
Joined: Dec 2012
Posts: 91
Likes: 0
From: Lake Havasu City AZ
Default

Yes they are still for sale and ready to go!
havasubrian is offline  
Reply
Old 04-06-2013 | 04:41 PM
  #9  
Registered
 
Joined: Mar 2013
Posts: 78
Likes: 0
From: Clearwater florida
Default manifolds

are they sold yet? if not call me 727-798-4388 thanks
rockit700 is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.