Pair 15” x 26” Maximus props – full diffuser ring
#1
Registered
Thread Starter
Join Date: Jul 2006
Location: The Sunshine State
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
Pair 15” x 26” Maximus props – full diffuser ring
Part numbers and serial numbers can be seen in the pics below. No hubs. Not interested in splitting them up.
The RH prop looks to be as delivered from Mercury Racing. There are some very light nics on the leading edges of 2 of the blades. The LH prop has been molested at some point. It does not have as much tip cup wrapped around the ear of the blades. It has been cleaned up with a surface conditioning disc at some point. The edges are not as crisp or as sharp as the RH. It would probably be best to get the LH tuned up but it is certainly usable as is.
I did try them on my boat but the prop shaft centerlines were not high enough to take advantage of the extra blade on the top end.
They are not brand new. They are not perfect. Pics below.
Lets start at $800 for the pair. You pay the UPS shipping from central Florida. Paypal is fine.
The RH prop looks to be as delivered from Mercury Racing. There are some very light nics on the leading edges of 2 of the blades. The LH prop has been molested at some point. It does not have as much tip cup wrapped around the ear of the blades. It has been cleaned up with a surface conditioning disc at some point. The edges are not as crisp or as sharp as the RH. It would probably be best to get the LH tuned up but it is certainly usable as is.
I did try them on my boat but the prop shaft centerlines were not high enough to take advantage of the extra blade on the top end.
They are not brand new. They are not perfect. Pics below.
Lets start at $800 for the pair. You pay the UPS shipping from central Florida. Paypal is fine.
#5
Registered
Thread Starter
Join Date: Jul 2006
Location: The Sunshine State
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
Gris, I would be willing to split these props up if I can sell the LH prop first. Send me a PM with email address or phone number. I'll get you whatever you are looking for as far as pics and info. If you want them, we can hash out a price.
You still on board with the RH Gaz, provided we can come to an agreement on pricing?
Merc offers 15-5/8, 15-1/4, and 15 dia labbed maximus props right out of their catalog. The standard non labbed maximus props are 15-5/8 only.
"The lab finishing process includes wedging the leading edge so the prop cuts into the water verses chopping; the blades are thinned in areas while maintaining integrity and the trailing edge cup height is modified to gain 300rpm...."
You still on board with the RH Gaz, provided we can come to an agreement on pricing?
Merc offers 15-5/8, 15-1/4, and 15 dia labbed maximus props right out of their catalog. The standard non labbed maximus props are 15-5/8 only.
"The lab finishing process includes wedging the leading edge so the prop cuts into the water verses chopping; the blades are thinned in areas while maintaining integrity and the trailing edge cup height is modified to gain 300rpm...."
#7
Registered
Join Date: May 2007
Location: Georgetown, TX
Posts: 1,272
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered
Thread Starter
Join Date: Jul 2006
Location: The Sunshine State
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
Nobody with a buried propshaft centerline wants better cruise speeds?
Nobody with a high propshaft centerline wants lower slip numbers?
Make me an offer.
Nobody with a high propshaft centerline wants lower slip numbers?
Make me an offer.