Surface Drive Conversion set up. $ 6,800 & ship cost.
Basically everything you need at a great cost !
Driveplate
Merc. Bellhousing
Huber HM925 Transmission w/ special rear flange.
Trans /Steering combo oil cooler w/ stainless lines & fittings.
Trans to Drive CV coupler.
Rear Trans. mount plate & hardware.
Arneson Extension Box.
Steering & Trim Rams w/ stainless lines Brackets etc..
B/W 17-21 Surface Drive drop box 1.32 Standard rotation .
New Steering Helm- Char Lynn .(no fittings /lines/bezel/wheel) they sold with boat.
2 Props - 1 -Stainless Cleaver Surface Prop 3 Blade 17 x 28 R.H. great shape.
1-Brass Surface Prop 16 3/4 x 23P R.H. fair shape.
Prop Adapter machined to use Standard square hub Merc. Props.
Prop nut & Washer.

Do you have a picture of the Prop adapter?

Yup ! Machinist actually oversized the taper a wee bit,but still worked,
Here ya go-

Badass setup.

Has anyone ever see this on a 25 outlaw?

Very reliable also !

could you send me your tel number ?

Thanks A.J

What are these rated at for hp ... And this is the ASD 6 correct ? Thanks

P.M. sent !

Similiar to the ASD 6. For a time the drives were built by Borg Warner.
Appreciate your interest !
Ken Lessard