24P Bravo I 4 Blade Props Labed with a cup.

Came off a Baja 320. Bought for my Baja 280 with a plan to move up in power. Selling the boat so don't need these. A little bit of polish and they will look brand new.

$650 + shipping

I may want them, need some info though.

What you need Big D?

Who labbed, #on prop so I can find out recipe and whether it would be close for my application.

Shoot me a pm or message on FB, will discuss

What engins did you have in your 320 and what kind of rpms were you seeing? I have a 322 with 454 mpi's and 25 3blade, only seeing 4000 rpm and 60mph. Need more R's if you know what I mean.

Thanks,
MD

Pics to jjturk2004&yahoo.com

I'm very interested.

Nightlife, I am interested too.. do you know who labbed.. Baja cup?? I need some R's also 25p m+ has great cruise but want to try 4 blades!!

I got these props from Jeff Fleg. They were on his 320 and I think when he used these props he had 454 mags. All I know is that someone who was in Texas did the lab job on them. They have a cup in them to hold the nose better. I can tell you on my boat I spin labed 23p 3 blades at around 5100 RPM. The boat feels real ass heavey and will not hold the nose. Very much trim and the boat will porpoise. With these props the boat rides completely different. The ass is out of the water more and hold the nose no problem. Only problem is I can only spin them at 4600 RPM and I lose about 3 mph top end. THey would have been perfect for me with a bit more power. Selling the boat so I don't need them now. You can ask Fleg if he will give you any more info, but he is trying to get them back from me so he may not give any info up.

Here are a few pictures of them. I just cleaned them with green scrubby pad to get the dust off them from sitting in the boat tent. A few minutes with a powerball and they would look pretty good.