500 Cubic Inch GM Performance Block, Brodix BB2X Heads, 871 TBS Blower, Twin custom built 900cfm carbs. Comp hydro roller .624 lift 248/254 cam. Eagle 4340 forged crank, Eagle 4340 Rods, J&E 8.4:1 pistons, this motor made 838hp/770trq on pump gas at 6200RPMs! This motor only has dyno time and 2 trips out on the boat for a few hours. TURN KEY SETUP!!!!! http://www.offshoreonly.com/classifi...o53904-en.html

Lots of views but no calls? I also have the whole boat for sale....turn key 100mph Avanti 24' asking $23,500 for the boat, motor, trailer!

You sure your boat is 24' long? If you tape it, you should get 22'6" including the 3" 'lip' the boat has all around at the belt line.

I guess your close to that without the swim deck

That makes sense; good luck with the sale!

Thanks, I need it to go so the new 632 with the 1071 on it can start to be built!

Come on I know someone wants this motor!!!!

Anyone?

Bump