(2) mercruiser 7.4 Bluewater long blocks
11-02-2013 | 06:22 PM
#1
Thread Starter
Registered
Joined: Dec 2010
Posts: 149
Likes: 0
(2) mercruiser 7.4 Bluewater long blocks
I am doing a repower in my Boat. I have (2) complete long blocks with intakes all still assembled in perfect working order
Neither motor has more than 220.
Mercruiser 7.4 Bluewater motors freshwater use MK IV blocks.
PM for pics I still need to remove exhaust manifolds and pulleys and pumps etc. taking offers. I can palletize them for shipping
Thanks for looking
Neither motor has more than 220.
Mercruiser 7.4 Bluewater motors freshwater use MK IV blocks.
PM for pics I still need to remove exhaust manifolds and pulleys and pumps etc. taking offers. I can palletize them for shipping
Thanks for looking
11-03-2013 | 08:56 AM
#4
Thread Starter
Registered
Joined: Dec 2010
Posts: 149
Likes: 0
As of today. The engines will be complete with.
Carb,intake,valve covers,valve train, heads,block,pistons rods bearing etc, timing set and cover,balencer,prolly water pump.and ignition still in time not dissembled.
This is a full running motor low hours everything but oil pan,exhaust manifolds, pulleys,fresh water pump, coolers,
remote oil filter,lines, etc.
Motors did not appear to be down on power and they ran absolutely fine this season only reason for removal is I am putting new stringers through out the boat and I am going to drop in 2 fresh 502's or I will be stroking these to 496. I just don't see tearing down 2 fine engines just for more torque so I might as well try to sell as is..
The boat is a 43 ft. And about 18'000 pounds a little more torque around the 3500 range is all I'm looking [ATTACH=CONFIG]511726[/ATTACH]
Carb,intake,valve covers,valve train, heads,block,pistons rods bearing etc, timing set and cover,balencer,prolly water pump.and ignition still in time not dissembled.
This is a full running motor low hours everything but oil pan,exhaust manifolds, pulleys,fresh water pump, coolers,
remote oil filter,lines, etc.
Motors did not appear to be down on power and they ran absolutely fine this season only reason for removal is I am putting new stringers through out the boat and I am going to drop in 2 fresh 502's or I will be stroking these to 496. I just don't see tearing down 2 fine engines just for more torque so I might as well try to sell as is..
The boat is a 43 ft. And about 18'000 pounds a little more torque around the 3500 range is all I'm looking [ATTACH=CONFIG]511726[/ATTACH]
Last edited by fastestonehere; 11-03-2013 at 09:09 AM.
11-04-2013 | 09:43 PM
#8
Registered
Joined: Aug 2012
Posts: 635
Likes: 0
From: Sarasota FL
I have two 502s I'm pulling right now that I'm selling. Mine have about the same amount of hours as your do. I'm going to sell mine without the intakes exhaust and the rest of my accessories . In other words mine will have oil pans heads valve covers,fly wheel and harmonic balancers. Pm me if your interested in these at all either.I'm putting in more power all the way around. Mine are in a 32' Fountain Fever and I want a little more torque and more horses.
