1994 Wellcraft Scarab side vent cover
11-10-2013 | 07:01 PM
#1
Thread Starter
Registered
Joined: Apr 2012
Posts: 26
Likes: 0
From: Atlanta, GA
1994 Wellcraft Scarab side vent cover
I have a NOS side vent cover that fits a 1994 Wellcraft Scarab. Will most likely fit a 1993 and maybe some others. It came with my Scarab that I recently sold and I never installed it. This is a PORT side cover as they are different side to side. To my knowledge these don't exist as brand new, never installed...except for this one.
Some dimensions that may help you. From point to point across the top is 32" and from point to point across the bottom is 53 1/2". The angle length on the left of the picture is 9 1/4" and the angle length on the right side of the picture is 16". This piece does not have holes pre-drilled so you'll need to drill them yourself.
First $200 gets it. Buyer pays shipping whatever that may be. PM if interested.
Some dimensions that may help you. From point to point across the top is 32" and from point to point across the bottom is 53 1/2". The angle length on the left of the picture is 9 1/4" and the angle length on the right side of the picture is 16". This piece does not have holes pre-drilled so you'll need to drill them yourself.
First $200 gets it. Buyer pays shipping whatever that may be. PM if interested.
Last edited by jumpybacon; 11-10-2013 at 07:11 PM.
11-11-2013 | 08:43 AM
#5
Thread Starter
Registered
Joined: Apr 2012
Posts: 26
Likes: 0
From: Atlanta, GA
I'm firm on the price at $200 plus the shipping. You can either PM me here or email me at [email protected]
