3x EFI for tall deck motors
 

I have 3 complete EFI systems for sale 4,000.00 each. This includes all the below or everthing you need.
Intakes customized by Wilson intakes for tall deck and matched ported to Brodix 332 oval port heads
Intakes, fuel rails, Injectors, MSD or GM Oil pump drives,Arizona billet TB, all sensors, Computers and wire harnesses, Flame arestors.
These have about 10 hrs on them and made 750HP on mild 604CI motors.
Ken

I will send new top plates so they can say what ever someone want on them.

Are you parting the boat out?

No I’m going back to carbs. With 3 EFI systems I’m running into ground interference. This could be fixed by running separate grounds to each motor or just switch back to carbs. I'm going to keep the boat so I decided to do the easier of the two.
Ken

These are still in the boat and running if anyone wants to see and hear them.

what base intake manifold are you using?

I believe it's an orange one.

These cost me just over 7K per motor. They are used by Potter Racing and Innovation for there Mil apps.
Ken

Awesome set up but would look a little out of place on my Baja. Separate grounds doesn't sound that hard to do in order to keep them.

when your paying someone to do it is. I have very limited space to work around 3 motors.

Just pulled off the boat so here are more photos.[ATTACH=CONFIG]516360[/ATTACH][ATTACH=CONFIG]516361[/ATTACH][ATTACH=CONFIG]516362[/ATTACH]