Ssm III Drives left and right
 

Was keeping these for my spares but could use some other parts more.
Drives are in good shape. Had clean royal purple oil in them.
Prop shafts are clean.
$3500

Your pm box is full

Any pic

[email protected]
Send me an email for pics

Grab those Tim. Spares are always a good thing

Send me pic [email protected] and 3500 for the pair

$3,500 for the pair. I'm realistic and not going to ask outrageous prices for them. Or offer someone .10 on a dollar

Pics please [email protected] What ratio are they?

Will they bolt up to a TRS?

No

Can you send me 300 pictures?? And will they work on an outboard boat? Oh, will you take $7.00 for both of them?Or will you trade me a Baja waterpump ?,,,I have a spare water pump that leaks alitlle water, but I think its still a fair trade.....LOL!!!!!! carry on..........

How bout I trade these, a 10-71, and $5,000 for a pair of 8-71's? Seems fair??? Wtf

how many hours on them? roughly? ever been gone through?

Hours that I am aware of 200-250. No idea if they've been gone through. But that's why they are priced as they are. The ones on my boat with $11,000 worth of receipts from speed masters I'd have listed for at least double this price.

Are thay 3's or 3a's?

Are they 1:33 or 1:50?

1.48 ratio 3's

I'll red the sad part is most guys don't realize just how much power you can put in front of a # 3 if you run it properly . I had # 3 on my 43 Scarab with 725 Hp a side and never had a drive issue . Think about it, most of the 41 Apaches came rigged with # 3' s .
RG.

Willing to take trades
Things I specifically need: flame arresters for dual 4150's
10-71 mooneyham
(4) 4150 blower carbs
Ssm 19 spline 4 blade props 26-28" pitch
Try me on anything else

What gimbals do these drives bolt up to?

Your price is too low I`d put these up for at least $20, 000
-KidApache

CT Rice #3-#5 not sure if Jamie still has the extra set. If not they are not to bad to come across. If your TRS and looking to upgrade this is a great way. Much stronger and I believe shorter.

They need Ssm specific gimbals, I sold the extra set last year. Rpmram and a few others on here have listed sets for a reasonable price. They are much stronger than trs, and cheaper than Konrad, just more work.

Good idea! Don't know what I was thinking.

I would try $30,000 for them

If you can get 30 for them ill split it with you and deliver on my dime! Hell ill deliver them attached to a 40 hawk for 30k

Back to seriousness. Would like to move these and buy some other stuff

Well I've been thinking about upgrading from trs. Do you have to redo your transom and can I still use the transmissions that I have powering the trs? Also are gimbals hard to find?

i have a set of gimbles that i would sell. the tail stock for a trs is different than the speedmaster but can be changed to allow you to reuse your transmission. your motors will have to be moved back a few inches but its not a big deal. its worth the work not to have to worry about your drives

its minor if you're capable of some fiberglass work and some minor mechanical... have done the change a few times and never looked back!!

Do it:)

What he said ^^^^

Seems like a great deal, I'm surprised they haven't sold! I bought a quart of oil from this guy, solid seller... ;)

+1 I bought two 509" long blocks from him, didn't get around to firing up until over a year later. Had an issue with one and though it had been that long he still took care of it!!!!

I trust dealing with him on anything!!!

A few prop kickers and picture collectors but nothing serious. Like to move these

these are SO tempting for my cig.. MUST...Resist...Spending...MORE...:waffen093:

lol!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!

Oh don't you worry. Your gonna be spending lots

$3500 is cheaper than you can buy the input shafts for. Open to offers or trades although if it keeps snowing I won't need to sell these lol

wasnt referring to the drives thats a steal if i wasnt building a motor right now i would be all over them...... i was making a smart ass remark towards 315dmax and his project he has got on his hands.