MSD 8560 -Read Carefully!!
02-27-2014 | 06:21 PM
#1
Thread Starter
Registered
Joined: Feb 2004
Posts: 2,590
Likes: 173
From: Endicott, NY
MSD 8560 -Read Carefully!!
I have the billet Aluminum Housing off of the MSD Ignition and an Iron Gear for it. Those parts are in good condition.
The Steel Shaft is off a hair and is not true, I chucked it up in a lathe. It has a slight wobble, so I know that it is bent. The mechanical advance works fine on the top.
AGAIN, THE SHAFT IS NOT PERFECT AND SHOULD NOT BE USED AS IT IS RIGHT NOW. I AM REALLY LISTING THIS FOR THE HOUSING AND THE IRON GEAR.
I figured somebody might want the whole setup so I figured I would offer it.
I am thinking $50.00 plus the ride.
The Steel Shaft is off a hair and is not true, I chucked it up in a lathe. It has a slight wobble, so I know that it is bent. The mechanical advance works fine on the top.
AGAIN, THE SHAFT IS NOT PERFECT AND SHOULD NOT BE USED AS IT IS RIGHT NOW. I AM REALLY LISTING THIS FOR THE HOUSING AND THE IRON GEAR.
I figured somebody might want the whole setup so I figured I would offer it.
I am thinking $50.00 plus the ride.
