Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
Kiekhaefer 280s K-Planes / Trim Tabs with Pumps >

Kiekhaefer 280s K-Planes / Trim Tabs with Pumps

Notices

Kiekhaefer 280s K-Planes / Trim Tabs with Pumps

Thread Tools
 
Old 06-07-2014, 02:45 AM
  #1  
Registered
Thread Starter
 
Join Date: Mar 2011
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
Default Kiekhaefer 280s K-Planes / Trim Tabs with Pumps

Set of used Kiekhaefer kplane trim tabs. I purchased these and didnt end up mounting them on my boat, ended up finding a set of smaller trim tabs instead... I have a 21 footer and these were just a tad overkill.

The tabs themselves have been stripped down to the aluminum, primered with Zinc Chromate, and then painted with multiple coats of Mercury Black and then coats of clear. Comes with a set of Kiekhaefer trim pumps that were also stripped and repainted, I have the bottoms removed in the pictures to show how clean they are inside with no signs of goo, dirt, or sludge but have all bolts and gasket. Brand new mercury solenoids and wiring to the motors. Trim rams move smoothly and no binding. Trim tabs measure 14"w x 19"l x 10" h.

You will need a set of hoses, which can either be purchased from mercury parts or you can have standard SS braided hydraulic lines made. Also needs the pins for the trim rams.













Asking $900 obo.
ka0tyk is offline  
Old 06-12-2014, 02:25 AM
  #2  
Registered
Thread Starter
 
Join Date: Mar 2011
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
Default

open to offers...
ka0tyk is offline  
Old 06-22-2014, 01:23 AM
  #3  
Registered
Thread Starter
 
Join Date: Mar 2011
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
Default

bump $750 + shipping
ka0tyk is offline  
Old 06-24-2014, 01:21 PM
  #4  
Registered
Thread Starter
 
Join Date: Mar 2011
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
Default

mr chaos if you're reading this i cant respond to your question:

CHAOS REIGNS has exceeded their stored private messages quota and cannot accept further messages until they clear some space.
ka0tyk is offline  
Old 06-24-2014, 02:18 PM
  #5  
Registered
iTrader: (2)
 
Join Date: Aug 2001
Location: OPKS & LOTO
Posts: 917
Received 12 Likes on 10 Posts
Default

Do you have the SS thru-hull fittings for the hydraulic hose connections or the SS studs to mount the planes to the transom?
Holy Smokes is offline  
Old 06-24-2014, 03:38 PM
  #6  
Registered
Thread Starter
 
Join Date: Mar 2011
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Holy Smokes
Do you have the SS thru-hull fittings for the hydraulic hose connections or the SS studs to mount the planes to the transom?
no I dont have the thru-hulls for the hydraulics. but id imagine a hydraulic hose shop could provide a threaded fitting that would work for muuuch less than a mercury part. as far as the "studs" it was my understanding that they mount to the transom with regular SS bolts...

picture of a set of "new" 280s planes... 2 thru-hulls and no "studs"
(not mine, just showing an example!!!)
ka0tyk is offline  
Old 09-08-2014, 08:56 AM
  #7  
Registered
Gold Member
 
Join Date: Aug 2010
Posts: 197
Likes: 0
Received 0 Likes on 0 Posts
Default

Hello ka0tyk

I send you pm have you look ?
shootitup is offline  
Old 09-12-2014, 03:28 PM
  #8  
Registered
Thread Starter
 
Join Date: Mar 2011
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
Default

sorry these sold on ebay a while ago. forgot to update.
ka0tyk is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.