CMI 525 Headers for reverse stagger setup....
07-04-2014, 02:54 PM
#1
Platinum Member
CMI 525 Headers for reverse stagger setup....
One set of CMI 525 headers for the forward engine in a reverse stagger setup (i.e.: starboard engine). The outboard (starboard) header is straight up. The inboard (port) header is leaned in. Headers have about 125 hours on them, 1/2 of which were in salt water. They had a few welds and were pressure checked last summer. The port header has a hose barb welded to the end of the distribution rail (see pictures).. I no longer own the boat these came from so really have no use for them. Any reasonable offer considered. PM me if interested. [ATTACH=CONFIG]525676[/ATTACH][ATTACH=CONFIG]525677[/ATTACH][ATTACH=CONFIG]525678[/ATTACH][ATTACH=CONFIG]525679[/ATTACH]
