89 357 sr1
#1
Thread Starter
Registered
Joined: Sep 2006
Posts: 1,391
Likes: 0
From: CapeComa,FL
Rigged hull and trailer.
Mid berth still completely apart, but all wiring is there in the stock panel. All lighting works, and most cabin lights have been upgraded to LED.
Forward berth 100% redone.....mirrored plexi bulk head with sony mids...
Head @ 50% assembled.
Cockpit seating gone, but I have a pair of elec. McLeod bolsters from an 03 Fastec for 1k more......and the rear seating for 500.
Marine air installed and works, has a new pump.
Has all stock gauges
4 hatches powder coated white
white rub rail missing insert.
Bad graphics on deck......need to be removed
Boat is Arctic White IMRON.
Bilge is fully rigged.....motor plates and inner and outer transom assemblies.....tim pumps (not the ones for the K-planes)
6 optima blue top batteries
Shore power cord and adapter....with battery charger still installed
Sony SUBS and mids installed under rear bench
Trailer is 84 MYCO triaxle steel trailer. Tires are good, no brakes and needs new fenders.
4k
[ATTACH=CONFIG]526365[/ATTACH]
[ATTACH=CONFIG]526366[/ATTACH]
[ATTACH=CONFIG]526367[/ATTACH]
[ATTACH=CONFIG]526368[/ATTACH]
[ATTACH=CONFIG]526369[/ATTACH]
[ATTACH=CONFIG]526370[/ATTACH]
[ATTACH=CONFIG]526371[/ATTACH]
[ATTACH=CONFIG]526372[/ATTACH]
Mid berth still completely apart, but all wiring is there in the stock panel. All lighting works, and most cabin lights have been upgraded to LED.
Forward berth 100% redone.....mirrored plexi bulk head with sony mids...
Head @ 50% assembled.
Cockpit seating gone, but I have a pair of elec. McLeod bolsters from an 03 Fastec for 1k more......and the rear seating for 500.
Marine air installed and works, has a new pump.
Has all stock gauges
4 hatches powder coated white
white rub rail missing insert.
Bad graphics on deck......need to be removed
Boat is Arctic White IMRON.
Bilge is fully rigged.....motor plates and inner and outer transom assemblies.....tim pumps (not the ones for the K-planes)
6 optima blue top batteries
Shore power cord and adapter....with battery charger still installed
Sony SUBS and mids installed under rear bench
Trailer is 84 MYCO triaxle steel trailer. Tires are good, no brakes and needs new fenders.
4k
[ATTACH=CONFIG]526365[/ATTACH]
[ATTACH=CONFIG]526366[/ATTACH]
[ATTACH=CONFIG]526367[/ATTACH]
[ATTACH=CONFIG]526368[/ATTACH]
[ATTACH=CONFIG]526369[/ATTACH]
[ATTACH=CONFIG]526370[/ATTACH]
[ATTACH=CONFIG]526371[/ATTACH]
[ATTACH=CONFIG]526372[/ATTACH]
#2
Thread Starter
Registered
Joined: Sep 2006
Posts: 1,391
Likes: 0
From: CapeComa,FL
More pics
[ATTACH=CONFIG]526373[/ATTACH]
[ATTACH=CONFIG]526374[/ATTACH]
[ATTACH=CONFIG]526375[/ATTACH]
[ATTACH=CONFIG]526376[/ATTACH]
[ATTACH=CONFIG]526377[/ATTACH]
[ATTACH=CONFIG]526378[/ATTACH]
[ATTACH=CONFIG]526373[/ATTACH]
[ATTACH=CONFIG]526374[/ATTACH]
[ATTACH=CONFIG]526375[/ATTACH]
[ATTACH=CONFIG]526376[/ATTACH]
[ATTACH=CONFIG]526377[/ATTACH]
[ATTACH=CONFIG]526378[/ATTACH]
#3
Thread Starter
Registered
Joined: Sep 2006
Posts: 1,391
Likes: 0
From: CapeComa,FL
More
[ATTACH=CONFIG]526379[/ATTACH]
[ATTACH=CONFIG]526380[/ATTACH]
[ATTACH=CONFIG]526381[/ATTACH]
[ATTACH=CONFIG]526382[/ATTACH]
[ATTACH=CONFIG]526383[/ATTACH]
[ATTACH=CONFIG]526384[/ATTACH]
[ATTACH=CONFIG]526379[/ATTACH]
[ATTACH=CONFIG]526380[/ATTACH]
[ATTACH=CONFIG]526381[/ATTACH]
[ATTACH=CONFIG]526382[/ATTACH]
[ATTACH=CONFIG]526383[/ATTACH]
[ATTACH=CONFIG]526384[/ATTACH]
#4
Thread Starter
Registered
Joined: Sep 2006
Posts: 1,391
Likes: 0
From: CapeComa,FL
4k for trailer, boat, offshore plates, McLeod elec bolsters, fastec rear seats, inner and outer transom assys,
Deck is shaved.....whole boat in white imron
White powder coated hatches with white acrylic...
About a hundred gallons of 93 in the tank
Inverter/charger, shore power and cable....
Ac....works.....
Deck is shaved.....whole boat in white imron
White powder coated hatches with white acrylic...
About a hundred gallons of 93 in the tank
Inverter/charger, shore power and cable....
Ac....works.....
#10
Registered
Joined: Oct 2009
Posts: 136
Likes: 0
From: Dayton, Ohio
Hey Rich, Drives doing great so far, had my boat out last weekend for the 1st time since i installed them... Thanks again..
Would you sell the a/c system separate from the hull??
Also I could use the grab bars that attach to the inside of the w/sheild and down to the dash if willing to separate??
Would you sell the a/c system separate from the hull??
Also I could use the grab bars that attach to the inside of the w/sheild and down to the dash if willing to separate??


