ISKY Camshaft 396284/.294
#1
Registered
Thread Starter
iTrader: (3)
Join Date: Jul 2012
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
ISKY Camshaft 396284/.294
Camshaft is in great condition (Needs to be dry exhaust), Here are the specs
Cam Style: Hydraulic roller tappet
Basic Operating RPM Range: 3,000-7,000
Intake Duration at 050 inch Lift: 238
Exhaust Duration at 050 inch Lift: 248
Duration at 050 inch Lift: 238 int./248 exh.
Advertised Intake Duration: 284
Advertised Exhaust Duration: 294
Advertised Duration: 284 int./294 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.578 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.608 in.
Valve Lift with Factory Rocker Arm Ratio: 0.578 int./0.608 exh.
Lobe Separation (degrees): 110
Computer-Controlled Compatible: No
Grind Number: RR-284/294
Valve Springs Required: Yes
Camshaft Manufacturers Description: High performance use/bracket racing; off-shore marine with I/O drive. Lopey idle. 2,500 stall. Up to 11:1 compression. 3.90-4.10 axle ratio. Up to 780 cfm carb.
Asking $250.00 +Ride
Cam Style: Hydraulic roller tappet
Basic Operating RPM Range: 3,000-7,000
Intake Duration at 050 inch Lift: 238
Exhaust Duration at 050 inch Lift: 248
Duration at 050 inch Lift: 238 int./248 exh.
Advertised Intake Duration: 284
Advertised Exhaust Duration: 294
Advertised Duration: 284 int./294 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.578 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.608 in.
Valve Lift with Factory Rocker Arm Ratio: 0.578 int./0.608 exh.
Lobe Separation (degrees): 110
Computer-Controlled Compatible: No
Grind Number: RR-284/294
Valve Springs Required: Yes
Camshaft Manufacturers Description: High performance use/bracket racing; off-shore marine with I/O drive. Lopey idle. 2,500 stall. Up to 11:1 compression. 3.90-4.10 axle ratio. Up to 780 cfm carb.
Asking $250.00 +Ride
Last edited by inspector747; 10-09-2014 at 02:49 PM.