Solid Roller Cams and Lifters
01-25-2015 | 01:57 AM
#11
Registered
Joined: Oct 2008
Posts: 1,316
Likes: 77
yes there are titanium springs out there, but $ _ and that's not a bad deal, are the cams minty...when will the 900's be done?
google search : mw-ind.com or katyspring.com then look for compression springs tech info.
Panther, you ever chat with "Big Joe" up Boston way?
google search : mw-ind.com or katyspring.com then look for compression springs tech info.
Panther, you ever chat with "Big Joe" up Boston way?
Last edited by I'CE; 01-25-2015 at 02:17 AM.
01-27-2015 | 10:04 AM
#12
Thread Starter
Frank's Marine Service
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
Concrete Cutting Joe? If so, I bought my Apache from him in 2004. I haven't chatted with him since I picked up the boat. Interesting guy...
The cams are in really good shape. There's no wear marks or blemishes. Everything is ready to go. I'm just going with a different setup which is why I'm selling these.
900's are going through assembly right now. I imagine I'll have them on the dyno in the next month or two depending on how much free time I have.
The cams are in really good shape. There's no wear marks or blemishes. Everything is ready to go. I'm just going with a different setup which is why I'm selling these.
900's are going through assembly right now. I imagine I'll have them on the dyno in the next month or two depending on how much free time I have.
Last edited by Panther; 01-27-2015 at 10:21 AM.
04-28-2015 | 02:23 PM
#16
Thread Starter
Frank's Marine Service
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
