Trs drives, trans, gimbals
12-26-2014 | 07:38 AM
#1
Thread Starter
Registered
Joined: Jul 2009
Posts: 8,527
Likes: 706
From: Taunton Ma
Trs drives, trans, gimbals
Have 2 of each, trs drives, gimbals, transmissions, inner plates,
Drives will need work. I can rebuild them if someone wanted but am offering them up cheap as they are.
Both props spin tight, no clunking but hard to turn and been sitting a while.
Trans were upgraded by mrd, but not sure of what was done. I can go through the transmissions and dyno them also for additional cost.
$2,000 plus shipping for all of it as it sits.
Drives will need work. I can rebuild them if someone wanted but am offering them up cheap as they are.
Both props spin tight, no clunking but hard to turn and been sitting a while.
Trans were upgraded by mrd, but not sure of what was done. I can go through the transmissions and dyno them also for additional cost.
$2,000 plus shipping for all of it as it sits.
