Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Swap Shop (https://www.offshoreonly.com/forums/swap-shop-253/)
-   -   Complete drop in "MRD 600" (https://www.offshoreonly.com/forums/swap-shop/321508-complete-drop-mrd-600-a.html)

Unlimited jd 12-29-2014 12:02 PM

Complete drop in "MRD 600"
 
Complete 454 with 250 blower from skip at mrd. Was in a 40' fountain.
Don't have a lot of history on it. Hour meter reads 150 but I can not be sure that is 100%accurate.
Clean oil, clean under the valve covers. Had it running today.
Gil manifolds, 990 heads, single 4150 carb
Hyd flat tappet cam
Was used in salt water. Accessories need paint but the rest of the engine is clean.
$4000 Obo shipping available
Email for pics and video of it running
[email protected]

Unlimited jd 12-29-2014 12:22 PM

It is set up for trs but I can swap a bravo coupler and bellhousing on if needed. Already has a bottom mount hi torque starter.

Unlimited jd 12-30-2014 06:50 PM

Will sell without the blower

Unlimited jd 01-01-2015 07:32 PM

Good running motor for short money

Unlimited jd 01-04-2015 06:01 PM

Ttt

Unlimited jd 01-07-2015 01:07 PM

Deal pending on the blowers. Will be swapping a 177 with chiller onto this engine. Have a complete parts motor, will sell both motors, with accessories and transmissions for $6000

scarab50 01-07-2015 03:47 PM

any word when they are coming to nj im looking at that superchiller listed for a 250

demax990 01-07-2015 05:24 PM

will you sell parts off of the parts engine? looking for heads

smokin' gun 01-07-2015 07:02 PM


Originally Posted by scarab50 (Post 4245775)
any word when they are coming to nj im looking at that superchiller listed for a 250

rich I will be coming thru nj next weekend to pick up the checkmate I bought

bringing your motor plates and your exhaust

I talked to lil red and poss bring blowers if you made a deal

all is good on my end

Unlimited jd 01-07-2015 07:06 PM

I'll sell the heads off the parts engine that need to be gone through for $300. Sorry not taking a good running motor apart for heads though.


All times are GMT -5. The time now is 03:21 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.