Offshoreonly.com

Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
BBC Rectangle port heads >

BBC Rectangle port heads

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices

BBC Rectangle port heads

Thread Tools
 
Old 03-16-2015, 12:20 PM
  #1  
Registered
Thread Starter
iTrader: (2)
 
Join Date: Aug 2010
Location: Cape Coral FL
Posts: 2,110
Received 419 Likes on 252 Posts
Default BBC Rectangle port heads
I have a complete set of heads off of a 575SCI gen 6 Merc Racing engine. Casting # 12562934. These heads have 100hrs on them since new, not rebuilt. They include studs and guide plates. Never seen salt water. Bolt them on and go. $700
snapmorgan is offline  
Reply
Old 03-19-2015, 10:48 PM
  #2  
Registered
 
hammerdown500's Avatar
 
Join Date: Jun 2010
Posts: 441
Likes: 0
Received 0 Likes on 0 Posts
Default
Pics please
hammerdown500 is offline  
Reply
Old 03-20-2015, 06:16 AM
  #3  
Registered
iTrader: (28)
 
Join Date: Mar 2003
Location: PA/MD
Posts: 2,497
Received 4 Likes on 4 Posts
Default
Pics to [email protected] when you have time.
Baja226sport is offline  
Reply
Old 03-20-2015, 10:32 AM
  #4  
Registered
Thread Starter
iTrader: (2)
 
Join Date: Aug 2010
Location: Cape Coral FL
Posts: 2,110
Received 419 Likes on 252 Posts
Default
will post pics this afternoon when i get to the shop
snapmorgan is offline  
Reply
Old 03-20-2015, 09:32 PM
  #5  
Registered
Thread Starter
iTrader: (2)
 
Join Date: Aug 2010
Location: Cape Coral FL
Posts: 2,110
Received 419 Likes on 252 Posts
Default
[ATTACH=CONFIG]538814[/ATTACH][ATTACH=CONFIG]538815[/ATTACH][ATTACH=CONFIG]538816[/ATTACH]

Still have original black paint and no corrosion
Attached Thumbnails BBC Rectangle port heads-100_4772.jpg   BBC Rectangle port heads-100_4773.jpg   BBC Rectangle port heads-100_4774.jpg  

snapmorgan is offline  
Reply
Old 03-27-2015, 04:03 PM
  #6  
Registered
Thread Starter
iTrader: (2)
 
Join Date: Aug 2010
Location: Cape Coral FL
Posts: 2,110
Received 419 Likes on 252 Posts
Default
Looking for offers. This stuff needs to go
snapmorgan is offline  
Reply
Old 03-27-2015, 04:05 PM
  #7  
Registered
Thread Starter
iTrader: (2)
 
Join Date: Aug 2010
Location: Cape Coral FL
Posts: 2,110
Received 419 Likes on 252 Posts
Default
..
Last edited by snapmorgan; 03-27-2015 at 05:40 PM.
snapmorgan is offline  
Reply
Old 03-27-2015, 04:18 PM
  #8  
Registered
iTrader: (7)
 
Join Date: Feb 2009
Location: NW Michigan
Posts: 8,302
Received 1,493 Likes on 807 Posts
Default
Those won't fit on mark IV 454 blocks will they
getrdunn is offline  
Reply
Old 03-27-2015, 05:12 PM
  #9  
Registered
Thread Starter
iTrader: (2)
 
Join Date: Aug 2010
Location: Cape Coral FL
Posts: 2,110
Received 419 Likes on 252 Posts
Default
They should, however, you will need a different gasket than the ones I have
snapmorgan is offline  
Reply
Old 03-27-2015, 07:35 PM
  #10  
Registered
iTrader: (7)
 
Join Date: Feb 2009
Location: NW Michigan
Posts: 8,302
Received 1,493 Likes on 807 Posts
Default
What cam are the 575 heads set up for? Those are flat tappet right? Like 560 lift.
Last edited by getrdunn; 03-27-2015 at 07:37 PM.
getrdunn is offline  
Reply



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.