Eddie Marine Exhaust
03-18-2015 | 08:10 PM
#1
Thread Starter
Registered
Joined: Oct 2012
Posts: 896
Likes: 38
From: Buffalo NY
Eddie Marine Exhaust
I have EMI thunder exhaust. Polished with stainless risers. I need 3 inches taller for my formula. I would do any of the following: buy risers, trade risers, buy spacers, or even trade everything. I would be open to offers to sell them outright also. Let me know if anybody has anything out there. Thanks
03-23-2015 | 09:54 AM
#2
VIP Member
Joined: Jul 2009
Posts: 783
Likes: 51
From: NJ
03-23-2015 | 11:59 AM
#3
Registered
Joined: Jan 2005
Posts: 3,570
Likes: 127
From: Pasadena, MD
If they are SS I know a guy (found on here) that will extend them pretty cheap. Just had a 496 riser set done for less then spacers. P/M me if you want his email. Just keep in mind they need to be cut and put back together so they wont look like they did.
These were shortened to fit a 454 under a Donzi Classic's hood.
Little paint and they look fine.
These were shortened to fit a 454 under a Donzi Classic's hood.
Little paint and they look fine.
03-24-2015 | 06:11 AM
#6
Registered
Joined: Dec 2004
Posts: 3,194
Likes: 5
From: hampstead nh
I have EMI thunder exhaust. Polished with stainless risers. I need 3 inches taller for my formula. I would do any of the following: buy risers, trade risers, buy spacers, or even trade everything. I would be open to offers to sell them outright also. Let me know if anybody has anything out there. Thanks
