Hering 34-p 4-blades w/pics
#1
Thread Starter
Registered
Joined: Oct 2014
Posts: 61
Likes: 0
From: IL
I am selling a nice set of used Hering 34p Props. They are in very nice shape. These are VERY sharp props! Excellent shape, have a couple tiny knicks in the leading edge of 1 blade on each, see pics, every flaw is pictured up close. Can be used as is no problem.
I need these sold to make room for more stuff I need! These are like art...I have them sitting in my living room! They just don't work great on my set up. This is a killer deal on a set of nice Herings! They are solid Hubs, 1.25" for XR drives
I am located in Northern IL, West Of Chicago. I can ship no problem.
$1300 or $1350 Shipped!










I need these sold to make room for more stuff I need! These are like art...I have them sitting in my living room! They just don't work great on my set up. This is a killer deal on a set of nice Herings! They are solid Hubs, 1.25" for XR drives
I am located in Northern IL, West Of Chicago. I can ship no problem.
$1300 or $1350 Shipped!










Last edited by GALLONSPERMILE; 06-17-2015 at 12:31 PM.
#3
Registered

Joined: Dec 2007
Posts: 2,054
Likes: 12
From: Pompano Beach, FL
Thought I would post these. Not sure which are the majc ones if any but will get me headed in the right direction!
[ATTACH=CONFIG]548353[/ATTACH]
For what its worth I have the same exact style Herings that 29" Pitch that I ran on the 28 for rough water. 22 degree rake. I can tell you that for that boat when I had the 300xs's I could turn them anything more than 6400rpm. 15 1/4" diameter.
[ATTACH=CONFIG]548354[/ATTACH]
[ATTACH=CONFIG]548353[/ATTACH]
For what its worth I have the same exact style Herings that 29" Pitch that I ran on the 28 for rough water. 22 degree rake. I can tell you that for that boat when I had the 300xs's I could turn them anything more than 6400rpm. 15 1/4" diameter.
[ATTACH=CONFIG]548354[/ATTACH]



