I need 2 straight back extension boxes and trade for my 3 up Imco boxes
Anyone interested?

How much do you want for the +3 boxes?

Whatever it cost to replace them with straight back boxes
i have a drive height issue i can get on plane with 3 up boxes. They are 5 years old but never seen ater until yesterday so i need the standard boxes

A new set is $4500 I believe but unfortunately I have none to trade. Mine drives are in really deep.

What were you thinking of doing?
You do know the engine will have to be moved back because of the transom plate angle if i remember correctly
these were originally purchased for a fountain and after the boxes were installed the engine mounts had to go back an inch.
They were then removed and i ended up with them because if they were installed correctly would have worked great.

I have offshore mounts so moving the front engine mount isn't really a big deal.

[ATTACH=CONFIG]542659[/ATTACH]Are you interested in buying mine or buying straight back boxes and swapping them?.
I do not know for sure how imco sells the boxes. whether they are 100% complete packages or they have to piece them together.
the 2 aluminum steering angles that bolt to the housing's imco wants a $1000 for 2, I made them for $200-300,
the longer input shafts are needed as well.I'm not positive if they come as a kit.
Ideally I was hoping the company that did the set up would stand behind the screw up however I doubt that will happen.
let me know what you are thinking of doing. it would be much easier to unbolt the engines move them a hair and install the straight back box.

Oh and btw i would want to keep the steering arms extenders that bolt to the boxes that i made. Just for liability purposes.