496 Manifolds + Risers - Water-rail style
 

I have a pair of 496 manifolds that I'm no longer going to use on my blown 454 (went to Stainless Marine). One manifold is basically brand new, the other a little older. All aluminum. Risers have been bead-blasted to remove paint and are a raw finish. The one heat sensor has been sealed up for the previous owner. The newer manifold needs to be plugged. The bells on the risers were removed in order to add extensions to deal with reversion so these will need to be extended to work with your setup. Will come with riser gaskets as well as metric nuts and washers to bolt them on (no turbulators).

Let's say $500 plus shipping for the whole thing.

I'll try to get some pics up later tonight if I can.

Thanks,
Tom

ttt

it is just one pair?

Yes. Just one pair.

Pics added....
 

Any questions.... just shoot me a PM.

** Please note: I do not have ANY brackets for mounting electronics or shift assemblies. My shift assembly and oil filter assembly are both mounted to the transom, and my electronics are bolted to a bracket on the cylinder head. Thanks for looking!


[ATTACH=CONFIG]547460[/ATTACH][ATTACH=CONFIG]547468[/ATTACH][ATTACH=CONFIG]547467[/ATTACH][ATTACH=CONFIG]547466[/ATTACH][ATTACH=CONFIG]547465[/ATTACH][ATTACH=CONFIG]547464[/ATTACH][ATTACH=CONFIG]547463[/ATTACH][ATTACH=CONFIG]547462[/ATTACH][ATTACH=CONFIG]547461[/ATTACH][ATTACH=CONFIG]547469[/ATTACH]

I'm interested. Sent you a PM Call or text me.

Thanks,
Travis
505 490 7710

Sold to 89Force235!!

Thanks Travis!