2000 502 MAG MPI moving to carb setup - lots to sell, including heads and prop
 

Moving to a carb setup and have a ton of MPI parts to sell. Engine not hurt, just getting freshened. 450 hours.

2000 502 MPI GenVI - S/N 0L632135

Manifold Assembly - Complete
Plenum Assembly - Complete
MEFI 3 ECU - remapped to increase rev limit and account for Lightning Header install. Very minor adjustments.
MEFI wiring harness
Distributor Assembly
Fuel Rail
Cylinder Heads - Complete
Exhaust Manifolds
Bravo 1 Rams

Bravo 1 24P slightly labbed prop - great condition. Ran 5100 RPM's on 2000 Sunsation 288

Pics to come soon. Unbolted everything last weekend except for Merc Exhaust and Bravo 1 rams. Those were earlier takeoffs.

only one thing missing!

Which harness is it the injector and ecm harness and or the block harness? How much for the ecm and harness

ECM harness. I need to keep the block harness for the conversion. $500 for the ECM/ECM harness combo. It's an 009 ECM. I can send a pic if you like. Might be this weekend since I have been on the road.

Cool Fuel/Fuel pump? :D

Trying to figure out if I just need to add a regulator or just toss it and go with Holley Red.

tried to send you PM but your box is full, Interested in the purchase

ditch the cool fuel add the regulator and return back to tank.

How much for the heads.
Ron 504-616-6005

Sorry guys, I just joined as a platinum member so I can now receive PM's. Hopefully will also get pics of everything today or tomorrow. Crazy busy with work!

Tunertech, try me on PM again.

Ron, 400 for the set + shipping. I unbolted them from the block and that was it. Valve covers still bolted on.

Send some pics to 504-616-6005
Ron

Will send in the next hour or so Ron. Meant to get them out yesterday but got sidetracked.

[ATTACH=CONFIG]554881[/ATTACH][ATTACH=CONFIG]554882[/ATTACH][ATTACH=CONFIG]554883[/ATTACH][ATTACH=CONFIG]554884[/ATTACH][ATTACH=CONFIG]554885[/ATTACH][ATTACH=CONFIG]554886[/ATTACH][ATTACH=CONFIG]554887[/ATTACH]

Here are[ATTACH=CONFIG]554888[/ATTACH][ATTACH=CONFIG]554889[/ATTACH][ATTACH=CONFIG]554890[/ATTACH][ATTACH=CONFIG]554891[/ATTACH] the ECM and harness

Call me Ron 504-616-6005

How much for the Bravo 1 rams? Can you add some pictures or text 630-605-6771

$75 + shipping for the pair. I will post them later today.

Ron, will call you in a bit.

Here are the rams.

[ATTACH=CONFIG]554968[/ATTACH]

Ron, left you a vmail.

Make some offers. Need to get this out of the garage.

TTT! Reasonable offers accepted.

Not to hijack, but why you going from MPI to carb?

Pro-active motor refresh that might add a few ponies. :D

Motor was running well when we pulled it but had been talking about doing this for a couple of years now. Lots of good deals to be had here folks. This stuff does me no good sitting in my garage.

Pm sent

Any pictures of the 24P prop? What are you asking for the prop?

At the lake this weekend but will get a pics of the prop out Sunday afternoon.

Asking 400 for the prop without hub.

Couple pics of the prop. Apologies...still on the outdrive.

[ATTACH=CONFIG]555575[/ATTACH][ATTACH=CONFIG]555576[/ATTACH][ATTACH=CONFIG]555577[/ATTACH][ATTACH=CONFIG]555578[/ATTACH][ATTACH=CONFIG]555579[/ATTACH][ATTACH=CONFIG]555580[/ATTACH]

PM Sent

Just responded.

PM sent

Are they the stock 502 exhaust manifolds?

How much for the injectors?

Yes they are. Took them off when I added headers. I can post pics tomorrow afternoon.

It's ok I'm actually looking for an aftermarket one. Thanks anyways.

Make some offers...I need my garage back!

How much for the prop?

350 for the prop

Still have the ECM?
Thanks
Scott

I've been away and not able to post so wanted to update...

Everything is sold but the heads. Anyone looking for a really good deal on a set of undamaged 2000 502 Mag heads, here is your opportunity. Motor ran great when I pulled it...just want it to run...well, greater. :D

PM sent

I would like to buy the MEFI 3 if not to high. [email protected]