42' Fountain Stagger Gil Tails
05-10-2016 | 09:51 PM
#1
Thread Starter
Registered
Joined: May 2009
Posts: 3,895
Likes: 124
From: Chicago, IL; Onekama, MI
42' Fountain Stagger Gil Tails
This is a set of tails for the front engine for a full stagger boat. It's taken a while for me to figure out the exact application these were from. These were used in the 42' Fountain stagger boats. This is for the front engine. The rear engine would use standard Gil tails. These are pretty rare, hence why it took me a while to figure out the exact application. $500 plus the ride.
Last edited by endeavour32; 05-10-2016 at 10:18 PM.
