Gibson Clamp-on 4.5" bullet mufflers
#11
Registered
Join Date: Apr 2017
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
I loved them, but cannot use them with my cam, I have to run dry pipes. 600hp is all I have. According to Gibson they are good to 1200
http://gibsonperformance.com/i-22957...-110003.html#!
Yes, still for sale.
http://gibsonperformance.com/i-22957...-110003.html#!
Yes, still for sale.
#16
Platinum Member
Platinum Member
Thread Starter
I have a custom ground cam.
It seems you are trying to figure if you will have reversion. I cannot answer that, I suggest asking your engine builder or posting your cam specs in the tech section and see what some of the guys on here suggest.
It seems you are trying to figure if you will have reversion. I cannot answer that, I suggest asking your engine builder or posting your cam specs in the tech section and see what some of the guys on here suggest.
#17
Registered
Join Date: Apr 2017
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Yah problem with that is I'm having trouble getting a hold of the guy who built my engine...I just bought the boat and unfortunately do not have the cam specs....guy who built my motor is jim benny from Maryland but nobody knows his new shop.....
#20
Platinum Member
Platinum Member
Thread Starter
I replied to Turbos230's PM a couple times. Still for sale. I still have 2 sets (4). They are in NEW condition. No scratched or dings.