Bravo X 1 swept square
07-12-2016 | 04:10 PM
#1
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
Bravo X 1 swept square
1 swept back X drive
Dual water pick up , had a stuck bearing on it small cut on shaft.
I have 2 other shaft set ups if desired to swap out
3000
Square back X
2700
1.36 ratio
Not positive on hours. Popped caps look clean.[ATTACH=CONFIG]557199[/ATTACH][ATTACH=CONFIG]557200[/ATTACH][ATTACH=CONFIG]557201[/ATTACH][ATTACH=CONFIG]557202[/ATTACH][ATTACH=CONFIG]557203[/ATTACH][ATTACH=CONFIG]557204[/ATTACH][ATTACH=CONFIG]557205[/ATTACH]
Dual water pick up , had a stuck bearing on it small cut on shaft.
I have 2 other shaft set ups if desired to swap out
3000
Square back X
2700
1.36 ratio
Not positive on hours. Popped caps look clean.[ATTACH=CONFIG]557199[/ATTACH][ATTACH=CONFIG]557200[/ATTACH][ATTACH=CONFIG]557201[/ATTACH][ATTACH=CONFIG]557202[/ATTACH][ATTACH=CONFIG]557203[/ATTACH][ATTACH=CONFIG]557204[/ATTACH][ATTACH=CONFIG]557205[/ATTACH]
