Maximus 32" Set
#1
Registered
Thread Starter
Maximus 32" Set
I have a pair of Maximus 32" casting, diameter cut down to 15 1/8 by BBlades. These are for a deep V application (originally a Fountain I believe) They are similar to a 30" set I had but still 32 pitch according to BB.
Perfect shape, missing a few vent plugs. $1,450 shipped to you. Call or text for serial #'s etc.
Marshall 516 286-6131
Perfect shape, missing a few vent plugs. $1,450 shipped to you. Call or text for serial #'s etc.
Marshall 516 286-6131
#3
Registered
You believe for a Fountain? What does Brett tell you they were done for? Might be interested if they are the right recipe. You have the BBlades serial numbers, check it out and let me know what it is that you have. PM on here or call my office @ 315-265-7370, not in there all the time now but leave a message and I will call you back.
#4
Registered
Thread Starter
Sorry 1340.... I hate that.
Here are the numbers:
RH 48-889970-32 BB# 3204
LH 48-889971-32 BB# 3203
I can't say what exactly BBlades did since it was before I bought them, other than cut down diameter. I have a mildly aggressive X-dim on my Magnum and they plane out with no issues.
Here are the numbers:
RH 48-889970-32 BB# 3204
LH 48-889971-32 BB# 3203
I can't say what exactly BBlades did since it was before I bought them, other than cut down diameter. I have a mildly aggressive X-dim on my Magnum and they plane out with no issues.
#5
Registered
15 1/4" x 32 short tube Maxes are a Fountain start point, You have the serial numbers and Brett should be able to look up exactly what he did to them. 15 1/8" might work or might not, only he can tell you if they were done for a Fountain. I would be interested if ............