1978 Python 24' project
#1
Thread Starter
Registered

Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
Boat is unique and rare. Bought it off a friend as a short term project to complete. Interior needs recovering or replaced which in these boats isn't a whole lot. Has merctrans with a 350 conversion. Looks sharp and includes dual axle trailer. Starts and runs well. Drive and trans works as they should. Low hour boat stored majority of its life. Deck and sides painted imron 15 years plus years ago. A couple of weekends work detail would go a long ways. Looks great as is. Stingers and transome rock solid.
This is a really neat good handling rough water boat for its size with classic looks at an affordable price. 7k
This is a really neat good handling rough water boat for its size with classic looks at an affordable price. 7k
Last edited by getrdunn; 10-17-2016 at 08:53 PM.
#5
Thread Starter
Registered

Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
thank you! Its a neat boat and just needs a little tlc. previous owner is a friend of mine who had it for over 25 plus years and used on an inland lake here in NW MI. i bought it from him with intent of getting back on the water. fired it up on trailer and sounds great. just got busy with work and other project boat. hopefully goes to a good home. pictures are exactly way i got it from previous owner. he had it covered in storage for several years.
#9
Thread Starter
Registered

Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
just a heads up I will consider driving down to state line to help split up drive. I will also throw in a couple of new front seats seats that will put you well on your way to making cockpit off to a good start. They are brand new.



