pair of 502's 590 hp 15k
#51
Registered
Thanks again for your offer Stinger. I've found another option thats going to be a lot easier at the end of the day and going to sell these motors off with an honest disclosure (or just strip off all the $h!t accessories and advertise them the way that bob was selling them in the first place after he rebuilt them). Bob is sending me the dyno sheets, these are good motors as long as you aren't using the junk accessories that the seller put on them. I'm sure there is somebody out there who needs fresh motors and can just swap all their current accessories onto them. I'll take this as a lesson learned, luckily shouldn't be an expensive one at the end of the day.
#53
Registered
#54
Registered
BTW note that they are cammed for dry exhaust. I also have the risers which are dry to the tip. This was the other factor that tipped me into going the other direction, as conversion to dry turned out to be a bigger headache than i expected.