396 drop in ready
03-14-2017 | 04:47 PM
#1
Thread Starter
Registered
Joined: Feb 2016
Posts: 34
Likes: 2
From: Williamstown NJ
396 drop in ready
396 punched out fresh build, imco manifolds, new coupler, new flywheel, new billet dist, rebuilt eldbrock carb 750, fully drop in ready plug and go all accessories included will run on stand serious buyer only please call Matt at 856-689-2406
https://goo.gl/photos/cLBft8MsdQRj37MSA
https://goo.gl/photos/Dc3Fs34fvKQKWpFz6
https://goo.gl/photos/Rc6UkXd7jSj7Jt9V8
https://goo.gl/photos/iRPSdPmufqoUmFWn9
https://goo.gl/photos/cLBft8MsdQRj37MSA
https://goo.gl/photos/Dc3Fs34fvKQKWpFz6
https://goo.gl/photos/Rc6UkXd7jSj7Jt9V8
https://goo.gl/photos/iRPSdPmufqoUmFWn9
03-14-2017 | 07:41 PM
#6
Registered
Joined: Feb 2012
Posts: 4,031
Likes: 10
From: westville, NJ
I thought about that red Excalibur in north jersey with a 409 in it. 402 bored out, not a she's-so-fine-my-409 w motor. other than that I haven't seen a 396 marine set up ever. heard sportfish guys used to run them since they never use full throttle anyway...
03-15-2017 | 12:44 PM
#7
Thread Starter
Registered
Joined: Feb 2016
Posts: 34
Likes: 2
From: Williamstown NJ
It's close to 500hp it's .30 over big cam pretty much everything is new yea I don't see many guys either with that motor my 502 went last yr got a good deal on this motor most of the parts did transfer but the balancer and flywheel
