I bough this boat for the long blocks and serpentine belt accesories to repower my formula. Im selling all the other pieces to help fund the freshing of the motors before I install them in my 272. This boat hit rocks but did not sink pics of damage are included. Someone spent big money rigging this boat all pieces are in very nice shape. I don't want to type a mile long paragraph if you are interested in anything on the boat or the whole minus the engines please just call me and I will give you all the details or get you any additional pictures that you may need. The engines currently run well but oil samples test high for camshaft and lifter wear metals. So I'm assuming it is wiping out the lifters and cams. I don't know the backstory behind this boat so don't bother asking. It was purchased from a third party. I do have a salvage title from the insurance company.. No trailer. Here are prices on some of the basics listed below. Please call Steve at 774-930-5591

Bolster seats $750 plus shipping, had a quote for about $350.00 for front and rear seats.

Throttles $150 Shifters $150 Both $250

280K planes, pumps and all lines $1200

Latham full hydralic steering, all lines, helm, steering wheel and drive back caps and theough hull fittings. $1800 sold,pending payment

4" miter cut exhaust tips with internal flappers $75ea

Big stuff 3 and Intergrated Racepak data logging digital dash complete engine managment system. Call for details, this stuff is super nice and cost someone big bucks. It intergrates gps speedos and All guages into the dash display.. This is everything to make the engine run. Intake manifold, fuel rails, injectors, weldon pumps and 10 micron filter, fuel lines, fittings to the pump and rails, msd boxes, dash display data loggers, all sensors, msd distribitors caps rotors and wires msd coils throttle bodies, flame arrestors, Everything that gets fuel and spark to the engine. $3500 per side or $6000 if they go together. Retail price on this setup is over $8,500 per engine

Stainless marine exhaust manifolds and risers, in perfect shape, no corrosion. Like new. Tails are std. Bravo exit location. $1500 a pair

Non oiler bravo gimble& inner plate, pins are good $400

Trim cylinders $150 a pair

Other gimbal with broken gimbla ring- for parts -$200

Hardin marine. Bravo mount billet oil coolers 15 plate $400 each

Hardin marine sea strainers, ball valves and aeroquip flush out quick connects- $500 each

Trim pumps 100 ea