Volvo Penta 7.4Gi EFI upper and lower intake manifold, fuel rail, old injectors, fuel hard lines and fuel filter, flame arrestor, distributor and a MEFI 1 or 2 controller. Also have new O-ring seals for the runners, a gasket for the flame arrestor, and fitting to hold the throttle cable. Fits Big Block Chevy with oval intake ports. No wiring harness. This is similar to a Mercury Racing 500 EFI set-up. I also have a brand new square port lower manifold for additional cost. $450 plus shipping.

https://miami.craigslist.org/brw/bpo...475808393.html

Bump

bump

bump

Just to let you know for your ad --- Volvo never used MEFI 2 ever. Yours is a MEFI 1.

Thank you

bump

What would you take for it shipped (54963) without the following?:
-injectors
-distributor
-MEFI ECU
-flame arrestor

I simply want the upper, lower, throttle body/linkage, new orings (you have) and fuel rails. Feel free to PM me. I probably wont be back on the site until Monday morning.

That's a interesting piece right there . Especially for a l29 motor . Wonder if it had a mag style cam grind in it