Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
31ft Original EXCALIBUR Part Out >

31ft Original EXCALIBUR Part Out

Notices

31ft Original EXCALIBUR Part Out

Thread Tools
 
Old 04-24-2018, 03:28 PM
  #1  
Registered
Thread Starter
 
Join Date: Jan 2015
Location: Cape Coral, FL
Posts: 649
Likes: 0
Received 1 Like on 1 Post
Default 31ft Original EXCALIBUR Part Out

This boat has been fully restored but not assembled yet. Clear Title.
New stringers, transom and floor. All done with honeycomb coring. Freshly painted white but needs wet sanded to fix a few runs!

Trailer was bought new 3 years ago when project was started and has less than 25 miles on it. Boat and Trailer $6,500

New Bolster seat and rear bench seat. White with blue accent panels. $850

New Gaffrig gauges and new shifter/ throttles with trim switches. $500

Fresh rebuilt Bravo 1 Drives with heavy duty 1+1/4" propshafts with Stainless Steel Showers. Drives also have Bob's Low Water Pickup Nosecones installed. $2,500 each

Fresh rebuilt HP Bravo Gimbals $800 each

280 Tabs with pumps and switches $1,000

L+R hand 29" pitch Hydromotive 4 Blade Pops with 1, 1/4" hubs $800 for both

Latham Hydraulic Steering, Rams, Hoses, Helm, Tank and Steering Wheel $1,500

Wiring Harnesses and sea strainer also available, call for pricing.

Call for more info 239-443-8233

Boat, trailer and all parts together for $15,000

Last edited by 777offshore; 04-24-2018 at 03:43 PM.
777offshore is offline  
Old 04-24-2018, 03:37 PM
  #2  
Registered
Thread Starter
 
Join Date: Jan 2015
Location: Cape Coral, FL
Posts: 649
Likes: 0
Received 1 Like on 1 Post
Default




777offshore is offline  
Old 04-24-2018, 03:38 PM
  #3  
Registered
Thread Starter
 
Join Date: Jan 2015
Location: Cape Coral, FL
Posts: 649
Likes: 0
Received 1 Like on 1 Post
Default


777offshore is offline  
Old 04-24-2018, 03:39 PM
  #4  
Registered
Thread Starter
 
Join Date: Jan 2015
Location: Cape Coral, FL
Posts: 649
Likes: 0
Received 1 Like on 1 Post
Default


777offshore is offline  
Old 04-24-2018, 03:40 PM
  #5  
Registered
Thread Starter
 
Join Date: Jan 2015
Location: Cape Coral, FL
Posts: 649
Likes: 0
Received 1 Like on 1 Post
Default


777offshore is offline  
Old 04-24-2018, 03:41 PM
  #6  
Registered
Thread Starter
 
Join Date: Jan 2015
Location: Cape Coral, FL
Posts: 649
Likes: 0
Received 1 Like on 1 Post
Default


777offshore is offline  
Old 04-26-2018, 01:48 PM
  #7  
Registered
VIP Member
 
Join Date: Mar 2007
Location: New Jersey
Posts: 936
Likes: 0
Received 4 Likes on 3 Posts
Default

I'm interested in the gauges and controls sent you a pm . Thanks Robert
excalibur82 is offline  
Old 04-26-2018, 04:16 PM
  #8  
Registered
iTrader: (2)
 
Join Date: Jul 2012
Location: Fort Worth, Texas
Posts: 276
Received 5 Likes on 3 Posts
Default

Pm'ed on the gimbals.
jamontes is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.