Offshoreonly.com - Vortech Superchargers

Page 2 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Swap Shop (https://www.offshoreonly.com/forums/swap-shop-253/)

- - Vortech Superchargers (https://www.offshoreonly.com/forums/swap-shop/355900-vortech-superchargers.html)

272bajadriver

01-26-2019 09:25 AM

Tried calling and texting at the number provided and can’t get a return call?

Got Cigs

02-15-2019 03:16 PM

$7500

Got Cigs

02-28-2019 03:10 PM

Ttt

Got Cigs

03-08-2019 02:37 PM

$7250

Got Cigs

03-19-2019 01:25 PM

Ttt

Got Cigs

03-22-2019 02:08 PM

$6900. Spring is near. Make Your Boat Fast Again. :D

Got Cigs

03-28-2019 06:48 PM

Ttt

Got Cigs

04-22-2019 02:13 PM

Will seperate

Iflylow57

04-22-2019 03:41 PM

Send me your number please

Got Cigs

04-22-2019 06:28 PM

Sent you a PM

Got Cigs

05-04-2019 02:37 PM

Ttt

Got Cigs

06-03-2019 11:08 AM

Ttt

Got Cigs

06-04-2019 01:54 PM

$6500

shaggy 79

06-04-2019 02:06 PM

Vortechs

Are the computers included in this package?

Velocity Tom

06-04-2019 03:30 PM

Are they a self contained unit. Or do you need to poke a hole in the oil pan for the oil return ?

Got Cigs

06-05-2019 12:31 PM

Quote:

Originally Posted by shaggy 79 (Post 4690036)

Are the computers included in this package?

You'll need to change out your MAP sensors and retune.

Got Cigs

06-05-2019 12:33 PM

Quote:

Originally Posted by Velocity Tom (Post 4690046)

Are they a self contained unit. Or do you need to poke a hole in the oil pan for the oil return ?

They are not self contained. They tap into the oil pressure switch, which is just a brass fitting, which I have and is included. No poking holes are necessary.

Baja Rooster

06-05-2019 02:26 PM

https://cimg8.ibsrv.net/gimg/www.off...de80bc796.jpeg
I put a bung in the port side valve cover for the return line. You can see the temporary brass plug in it right in front of the breather.

Rookie

06-05-2019 08:26 PM

Wish these could be easily retrofitted to a standard BBC, tuned port injection with a carb/throttle body hat.

Baja Rooster

06-05-2019 09:30 PM

Quote:

Originally Posted by Rookie (Post 4690317)

Wish these could be easily retrofitted to a standard BBC, tuned port injection with a carb/throttle body hat.

The kit I had was a standard intercooler set up for an EFI setup with a rectangle to round adapter tacked on to run a carb hat.

Full disclosure - I never ran it though. I thought better of my engine and drive limits and went a different route.

Got Cigs

06-06-2019 12:26 PM

Quote:

Originally Posted by Baja Rooster (Post 4690275)

https://cimg8.ibsrv.net/gimg/www.off...de80bc796.jpeg
I put a bung in the port side valve cover for the return line. You can see the temporary brass plug in it right in front of the breather.

Yes, thank you bajarooster. You will need to tap in a bung on your valve cover for a return line. Mine were tapped into the rear corners of valve cover.

Got Cigs

06-14-2019 10:53 AM

Ttt

endeavour32

06-14-2019 10:38 PM

Anyone know if these will fit on 525's and still retain the freshwater cooler and headers?

Got Cigs

06-15-2019 02:09 PM

Id love to say yes. Lol. I can almost say with certainty, that the coolant tank and heat exchanger on the 525's will be in the way. It would probably require either relocating those, or different brackets to mount superchargers. It definitely wouldn't be a "Bolt on and go" set up.

Got Cigs

06-24-2019 01:18 PM

Ttt

Got Cigs

07-11-2019 03:36 PM

Ttt

stokes0786

07-17-2019 06:50 PM

Call or text me about the pro chargers if you have two still

6185501420 interested in both setups

FloridaFountain1547

07-31-2019 10:01 PM

If stokes0786 doesn't come through I'm interested in buying one kit. PM will be sent.
Thanks :hitit:

Got Cigs

09-02-2019 01:28 PM

Ttt

stokes0786

09-02-2019 08:25 PM

Setup

still interested 6185501420

Got Cigs

09-03-2019 02:09 PM

Quote:

Originally Posted by stokes0786 (Post 4705047)

still interested 6185501420

Text sent

Got Cigs

09-09-2019 10:20 AM

Would consider a trade deal on a pair of ITS transom assemblies in good condition.

Got Cigs

10-01-2019 12:54 PM

Ttt

Got Cigs

10-10-2019 02:02 PM

Ttt

Got Cigs

10-27-2019 02:13 PM

Ttt

Got Cigs

11-18-2019 03:59 PM

Ttt

payuppsucker

11-18-2019 04:59 PM

Someone please buy these.
This guy owes me money. I rented him my girlfriend for a couple minutes in Key West 🤣🤣🤣

Just kidding, bump for a straight up great guy.

Got Cigs

11-19-2019 04:26 PM

Quote:

Originally Posted by payuppsucker (Post 4715481)

Someone please buy these.
This guy owes me money. I rented him my girlfriend for a couple minutes in Key West 🤣🤣🤣

Just kidding, bump for a straight up great guy.

And I'm still itching.... JK Thanks for the bump brotha.

scippy

11-19-2019 04:35 PM

Would this fit an AS&M efi'??......I have Imco power plus manafolds which are pretty tall ...I can send you a pic of my engines

Got Cigs

11-19-2019 04:46 PM

Hey Scippy, I could not say for sure. My guess is, ti could be modified to fit your application.

All times are GMT -5. The time now is 12:42 AM.

Page 2 of 3

Show 40 post(s) from this thread on one page