Pair of 496 1 has 200 other just a couple hours. Eagle lower end 781 heads 850 Holley single plane HP500 style intakes. crane flat tappet cams, roller rockers HD oil coolers. 550ish 9500

Pair 489 100 hours, skat rotating assembly , srp Pistons, arp studded, 088 heads crane roller cam and rockers 4/7 timing swap, Holley carbs. 12000, 530ish HP

1 496 25 hours skat rotating assembly race ready aluminum heads, roller cam and rockers , Holley carb, single plane intake has fresh water coolin system on it also. 6200.
there is a twin to it but dropped a valve. Can buy the matching for 1200

1 509? I believe it’s 30 over. Has 2 hours on it. Rings were never seated. Motor is complete. MSD dist, Holley carb , single plane intake, 088 heads, gen 6 roller motor, roller rockers, large oil cooler, gaffrig Arrestor. 3800

1 gen 6 502 415, has a lower end knock. Had 150 hours on it from a new long block. Holley 800 crab. Motor is complete
3500

1 540 bow tie motor. Long block. Come with a couple acc. Motor is fresh build. Crower Rods , crank, JE Pistons, Merlin heads, crane roller cam, 14qts pan, oil adaptor and filter head. Billet flywheel , Crower rockers, super danmpner. 6500

1 468 gen 6 500 HP reverted water needs refresh. Crane cam rockers singl plane Intake quick fuel carb, maybe 3 hours on it. Carb to pan fly to harmonic. I have a couple acc I can include. 3500

1 454 gen 6 has 890 hours. All parts to have a complete engine. Sits as a long block. Was mpi, have all carb parts to build. 2000

1 350 mag motor. 200 hours. Mostly complete but not a drop in. Needs a carb and a couple small things. 1000

496 10/1
489
are 9.5 with Closed cooling.

496 with closed cooling is 9/1

Another set of 540s came in.

pm me the info on the set of 540’s and pictures that just came in. I’m still looking

approx what year is the 350? Salty?
thx Chris

To be honest no clue, boatvwas a repower at one point but no clue other then that. Boat wasfrom the Midwest, never seen salt

350 center bolt valve covers? center rise exhaust manifolds? missing Q jet is no issue. but what else is missing?
thanks, Chris

Center bolt V covers, it’s a mag motor , yes centeri rise exhaust. Carb was picked for parts, needs a couple acc that’s about it.

Pm me on the 540’s please