496HO Camshaft
#1
Registered
Thread Starter
iTrader: (8)
496HO Camshaft
Merc 496 HO camshaft. Just pulled to upgrade to a Raylar 203 cam. Lobes, journals, cam gear all look good. Normal wear patterns for a hyd roller profile.
222/232 @.050" .510/.510" lift 114LSA
$250 + Ship. New from Merc #881628 $938 from Bam Marine.
Check my seller feedback here. Honest and upfront.
222/232 @.050" .510/.510" lift 114LSA
$250 + Ship. New from Merc #881628 $938 from Bam Marine.
Check my seller feedback here. Honest and upfront.
Last edited by Ryan00TJ; 12-04-2018 at 11:25 AM.
#3
Registered
Thread Starter
iTrader: (8)
Already was running the 80mm CoolGap intake and roller rockers. 203 cam will be installed once I put the engine back together. I had the cam on the shelf, so why not. Comp 911 valvesprings, retainers, locks and rotator eliminators will complete the setup on stock heads at the moment. I'm hoping for 2 mph gain vs the HO cam. Can't afford the Raylar heads and high 70s and reliable is ok with me.
Last edited by Ryan00TJ; 12-13-2018 at 07:10 PM.