Mercruiser BBC and Bravo Transom gimbal
#1
Thread Starter
Registered
Joined: Jan 2013
Posts: 32
Likes: 0
hi,
i have a mercruiser genV bbc with closed loop cooling and a bravo transom gimbal with inside plate and all. The BBC has about 200 hours on it in fresh water I am told. The gimbal looks good, didn’t have much wiggle when mounted and the pistons held pressure. Both are pulls from a project boat so I never ran them.the engine oil was clean and clear and the engine coolant was bright green. I also have the y-pipe.
located on the central coast in California. Make an offer.
Jason










i have a mercruiser genV bbc with closed loop cooling and a bravo transom gimbal with inside plate and all. The BBC has about 200 hours on it in fresh water I am told. The gimbal looks good, didn’t have much wiggle when mounted and the pistons held pressure. Both are pulls from a project boat so I never ran them.the engine oil was clean and clear and the engine coolant was bright green. I also have the y-pipe.
located on the central coast in California. Make an offer.
Jason










#2
Registered

Joined: Dec 2010
Posts: 411
Likes: 13



