Winter repower 500 EFI's
#1
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
Winter repower 500 EFI's
If anyone is looking to repower this winter Im rebuilding these and should be done in a couple months. contact me if you're interested and please be a serious buyer, dont waist our time, I have not scanned the ecm's for hours..........Send me a pm if interested
1. blocks will be hot tanked, new cam bearings, honed and check for square,
2. heads will be disassembled magnafluxed, valve job, new seals and reassembled
3. pistons will be cleaned reringed
4. rods will be resized
5. crank will be checked
6. all new bearings, rings, gaskets and lifters
7. engines will be reassembled and will be test fired with video
8. engines will be sold complete less exhaust
9. and anything else I forgot
10. price will be determined after the cost are added up, but will be reasonable
1. blocks will be hot tanked, new cam bearings, honed and check for square,
2. heads will be disassembled magnafluxed, valve job, new seals and reassembled
3. pistons will be cleaned reringed
4. rods will be resized
5. crank will be checked
6. all new bearings, rings, gaskets and lifters
7. engines will be reassembled and will be test fired with video
8. engines will be sold complete less exhaust
9. and anything else I forgot
10. price will be determined after the cost are added up, but will be reasonable
#2
Registered
Join Date: Aug 2019
Location: NWI
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Interested
Interested in the motors, please call me at 7087748711 or 2243390952 or email me at [email protected]
#3
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
heading to the machine shop
#5
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
sent you a pm
#6
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
I've had several ask if Id sell them as is, before the rebuilds, Yes I will but Im not going to give them away, if you're serious make me a serious offer.
#7
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
These are headed to the machine shop Friday
#10
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
for some reason the tax rate is high on this color.........injectors have been sent to Articfriends ( Smitty ) for rebuilds and flow testing, these will be practically new when done
Last edited by F-2 Speedy; 08-28-2019 at 12:19 PM.