Winter repower 500 EFI's
#1
If anyone is looking to repower this winter Im rebuilding these and should be done in a couple months. contact me if you're interested and please be a serious buyer, dont waist our time, I have not scanned the ecm's for hours..........Send me a pm if interested
1. blocks will be hot tanked, new cam bearings, honed and check for square,
2. heads will be disassembled magnafluxed, valve job, new seals and reassembled
3. pistons will be cleaned reringed
4. rods will be resized
5. crank will be checked
6. all new bearings, rings, gaskets and lifters

7. engines will be reassembled and will be test fired with video
8. engines will be sold complete less exhaust
9. and anything else I forgot
10. price will be determined after the cost are added up, but will be reasonable
1. blocks will be hot tanked, new cam bearings, honed and check for square,
2. heads will be disassembled magnafluxed, valve job, new seals and reassembled
3. pistons will be cleaned reringed
4. rods will be resized
5. crank will be checked
6. all new bearings, rings, gaskets and lifters


7. engines will be reassembled and will be test fired with video
8. engines will be sold complete less exhaust
9. and anything else I forgot
10. price will be determined after the cost are added up, but will be reasonable
#2
Registered
Joined: Aug 2019
Posts: 1
Likes: 0
From: NWI
Interested in the motors, please call me at 7087748711 or 2243390952 or email me at [email protected]
#10
for some reason the tax rate is high on this color.........injectors have been sent to Articfriends ( Smitty ) for rebuilds and flow testing, these will be practically new when done
Last edited by F-2 Speedy; 08-28-2019 at 12:19 PM.








