2012 XR drives with Imco lowers
#1
Platinum Member
Platinum Member
Thread Starter
2012 XR drives with Imco lowers
2012 Mercury Racing XR uppers with regular length Imco Sc lowers 1.50 ratio. Rebuilt last year have receipts. About 40 hours on drives. Always ran Mercury Racing oil and drive showers. 12,500 for the pair
#3
Platinum Member
Platinum Member
Thread Starter
I am pretty sure nothing is needed to do swap other then different hubs in props for larger prop shafts. Maybe some one can correct me on this?
#4
VIP Member
VIP Member
iTrader: (1)
Join Date: Nov 2012
Location: Peterborough Ontario
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
you are correct XR's will go right on, Gimble bearing needs to be changed out needs one with red dot. and I think with the bigger U joints you cannot trim drives all the way up to top there is not enough room in the housings.
anyone else want to chime in on this... I am going by memory here
anyone else want to chime in on this... I am going by memory here