2012 XR drives with Imco lowers

Reply Subscribe

Thread Tools

09-03-2019 | 10:44 AM

rvtransport

Thread Starter

Platinum Member

Joined: Feb 2006

Posts: 292

Likes: 22

From: Manitowoc, WI

2012 XR drives with Imco lowers

2012 Mercury Racing XR uppers with regular length Imco Sc lowers 1.50 ratio. Rebuilt last year have receipts. About 40 hours on drives. Always ran Mercury Racing oil and drive showers. 12,500 for the pair

09-03-2019 | 11:48 AM

justinp20012500

Registered

Joined: Jul 2009

Posts: 117

Likes: 0

From: Utah

What is needed to replace regular bravos? Engine coupler? Bearing?

09-03-2019 | 12:27 PM

rvtransport

Thread Starter

Platinum Member

Joined: Feb 2006

Posts: 292

Likes: 22

From: Manitowoc, WI

I am pretty sure nothing is needed to do swap other then different hubs in props for larger prop shafts. Maybe some one can correct me on this?

09-03-2019 | 06:36 PM

Hopper

VIP Member

Joined: Nov 2012

Posts: 179

Likes: 0

From: Peterborough Ontario

you are correct XR's will go right on, Gimble bearing needs to be changed out needs one with red dot. and I think with the bigger U joints you cannot trim drives all the way up to top there is not enough room in the housings.

anyone else want to chime in on this... I am going by memory here